ENGL
IS
H
5
8. Switch the percolator on using the on/off switch on the base. The indicator light
inside the switch comes on when the percolator is switched on.
9. The coffee is ready when the indicator light on the percolator comes on.
10. Always unplug the mains lead after use.
Note:
It is important that the appliance is not plugged in until the percolator is
ready for brewing and the percolator lid is securely in place. Always keep an eye
on the percolator during use.
Warming
• The coffee will stay warm for as long as the mains lead is connected.
• If the percolator pot is used for reheating cold coffee, the tube and coffee basket
must be removed first. Never reheat or keep warm less than 4 cups of coffee.
• Always unplug the mains lead after use.
Care and maintenance
• Clean the appliance carefully and regularly. A dirty appliance could pose a health
hazard. Unplug the mains lead from the wall socket and let the appliance cool off
before cleaning it.
• The appliance should be descaled regularly. Failure to do so could cause
the appliance to malfunction and be hazardous.
• Do not expose the heating element, plug or mains lead to water.
• Never immerse the percolator in water or other liquid and protect it from drips
and splashes.
• Always pull the plug out of the wall socket when the appliance is not in use.
Note:
Limescale deposits can affect the performance of the appliance and even
damage it. It is therefore important that it is descaled regularly.
Descaling
1. Fill the percolator with 4½ cups of water. Insert the tube and coffee basket.
2. Let the water boil for 5 minutes to make it really hot.
3. Pull out the plug from the wall socket.
4. Add a descaling agent and leave it to work for 6 hours. Follow the instructions on
the packet of the descaling agent for the correct dosage.
5. Empty the percolator and rinse it thoroughly.
6. Boil some water in the percolator with the tube and coffee basket in place until
the indicator light comes on.
7. Switch the percolator off and unplug it from the wall socket. Empty the water out.
8. Wipe the outside of the percolator with a damp cloth to remove any splashes
which could spoil the finish.
9. The percolator is now ready to use.
Note:
Use only food-grade descaling agents inside the percolator. Never boil the water
with the descaling agent mixed in.
Содержание 18-4390
Страница 2: ......