7
ENG
LIS
H
Floor nozzle
The floor nozzle is connected to the flexible attachment adapter of the extension tube. Angle the adapter
straight down and push it into the floor nozzle connection. Thereafter turn the adapter straight up and connect
the extension tube.
Straight nozzle
The straight nozzle is used as an extension of the steam cleaner outflow. The nozzle provides a good jet of
steam and cleans cramped spaces effectively.
It is possible to attach a flexible nozzle or nozzle with a brush onto this nozzle.
Round brush
Suitable for cleaning surfaces such as toilet rims, kitchens, skirting boards, step corners etc. The brush can also
be used for cleaning clothes. Connect to the straight nozzle or to the extension tube`s attachment adapter.
Round copper brush
Hard copper brush for cleaning toilet rims, kitchens etc. Connect to the straight nozzle or to the extension
tube`s attachment adapter.
Flexible nozzle
Suitable for cleaning surfaces which are hard to reach. Connect to the straight nozzle or to the extension
tube`s attachment adapter.
Textile cloth
The removable textile cloth is suitable when ironing clothes etc. Mount the cloth by pulling it over the textile
adapter. The holder can also be used without the cleaning cloth to remove creases in clothes and textiles.
Squeegee
The squeegee is used for cleaning windows, mirrors and other glass surfaces.
PLEASE NOTE!
Never use
the steam cleaner on windows or glass surfaces which are too cold as the difference in temperature will lead
to them being damaged, directly or in the future. To be mounted on the textile adapter.
Use
Tip!
First test a small surface or object if you are unaccustomed to using the steam cleaner or unsure of
which materials your can use the steam cleaner on. The surface/object which is to be cleaned must
withstand high temperatures and high atmospheric humidity.
1. Ensure that the steam cleaner has cooled down and that no excess steam remains in the container
before unscrewing the filling lid. (See section on Care and maintenance.)
2. Use the enclosed funnel and measuring scoop when filling the steam cleaner container with clean water.
Fill the container with a maximum of 1500 ml. Fill the container slowly to prevent spillage and splashing.
3. Refit the filling lid by screwing it clockwise until the lid valve is closed tightly. Thereafter mount the
necessary attachments.
4. Ensure that the steam cleaner power switch (7) is in the off position (“0”) and that the steam button (9) is
not pressed down. Thereafter connect the plug to a socket.
5. Turn the switch (7) to position “1”. The power switch indicator lamp goes on and the steam cleaner starts
to heat up.
6. When the pressure indicator (5) goes on the required steam pressure has been reached and the steam
cleaner is ready to be used.
7. Release the locking button (8), press the steam button (9) and move the jet slowly over the surfaces
which are to be cleaned. Keep the outflow approx. 2 - 3 cm from the surface.