6
EN
G
LI
SH
Product description
Cleaning using steam is a safe way of cleaning in the home. The product can sterilize and disinfect using the
steam which is produced and is suitable for use in bathrooms, toilets and on glass furniture, kitchen uten-
sils and cars etc. It can also be used to clean clothes. It removes both visible dirt and invisible bacteria. The
steam cleaner is also a great help when cleaning not only floors and walls but also corners and every nook
and cranny.
Safety
First test a small surface or object if you are unaccustomed to using the steam cleaner or unsure of
which materials your can use the steam cleaner on. The surface/object which is to be cleaned must
withstand high temperatures and high atmospheric humidity.
-
Before use, ensure that the equipment is whole and in working order. The steam cleaner must not be
used if it has been dropped or damaged in any way.
-
The power cable should be checked regularly.
If the power cable is damaged it must be changed at the place of purchase or at a qualified repair shop.
-
The steam cleaner jet must never be aimed directly at electronic goods or electrical installations.
-
Never aim the steam cleaner jet at yourself or any other person as the jet is very hot and may cause
personal injury.
-
Always switch the steam cleaner off when it is not being used.
-
Always disconnect the steam cleaner cable after use as well as before cleaning the machine.
-
Never use the steam cleaner in or close to swimming pools which contain water.
-
Never place the steam cleaner in the proximity of heat sources such as fire, radiators, heaters, hot-air
fans etc.
-
Never open the safety lid during use or when there is excess steam left in the container.
-
The steam cleaner contains a thermostat which regulates the temperature and prevents overheating.
If the temperature still keeps on rising, disconnect the cable immediately and stop using the steam
cleaner. Send the product off to be serviced.
-
Never cover the steam cleaner during or directly after use.
Getting started
Before using the product for the first time it must be cleaned. See section on Care and maintenance.
Connecting attachments
1. Connect the tracks of the steam cleaner outflow to the internal guideways of the attachment.
2. Carefully push the attachment in a short distance before turning it slightly in the direction of the arrow.
3. Then push the attachment all the way in and continue turning it a quarter revolution in the direction of
the arrow until the attachment is securely fastened. The marking on the attachment should be aligned
with the marking on the steam cleaner.
4. Disassemble the attachment in the opposite order.
Connecting the extension tubes
1. Connect the threaded part of the extension tube onto the steam cleaner outflow and tighten
the locking nut.
2. When necessary, connect the lower extension tube by sliding it onto the upper tube until the pipe
is locked on.
3. Loosen the lower pipe by pressing the locking button while pulling the tube straight out.
