8
EN
G
LI
SH
Please note!
Do not keep the steam button pressed down. Instead, let the steam out in short burst to
economize with the steam. Release the steam button when the steam starts to run out and try again
after approx. 10 seconds.
8. When the steam cleaner emits a signal the water level is low and it must be refilled. Ensure that the
steam cleaner has cooled off before refilling it (see items 1 to 6).
9. Always disconnect the power cable plug after use and let the steam cleaner cool off properly before
releasing excess steam (See Care and maintenance).
10. During frequent use: Switch the power switch off (7), disconnect the power cable (3) and press the
steam button (9) to release any excess steam. Let the steam cleaner cool off before opening the filling
lid to fill new water. Thereafter follow items 2 to 8 above.
Care and maintenance
Releasing excess steam
Switch the power switch off (7), disconnect the power cable (3) and press the steam button (9) to release any
excess steam. Let the steam cleaner cool off before opening the filling lid to fill new water.
Cleaning
1. Ensure that the steam cleaner is disconnected from the mains before starting cleaning.
2. To avoid electric shock, never clean the steam cleaner using water.
The machine casing and attachments can be cleaned using a dry cloth.
3. If the steam cleaner is used regularly the container should be filled with water and shaken to remove
coatings at least once per month. Thereafter empty the container.
4. When cleaning, ensure that the tube, nozzle and steam outflow are not blocked.
Storage
Store the steam cleaner in a dry, ventilated space.
Disposal
Follow local ordinances when disposing of this product. If you are unsure about how to dispose of
this product contact your municipality.
Specifications
Voltage
230 – 50 V AC 50 Hz
Power:
2000 W
Length, hose
approx. 2 metres
Length, power cable
approx. 2.5 metres
Container volume
1.5 litres
Steam pressure
4 bars
