Cole Parmer PCRmax Alpha Cycler 1 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 64

background image

REPLACEMENT CABLE

Should the mains lead need replacement, a cable of 1.5 mm

2

of harmonized code H05VV-F 3G connected

to an IEC320 plug should be used.

IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN.

ENVIRONMENTAL CONDITIONS

The Alpha Cycler is designed operate under the following conditions:
•  Indoor use
•  Ambient temperature range +5°C to +35°C
•  Altitude to 2000m
•  Relative humidity not exceeding 80%
•  Mains supply fluctuations not exceeding 10%
•  Over voltage category II IEC 60364-4-443
•  Pollution degree 2

Note:

The control specifications are quoted at an ambient temperature of 20°C ±2°C.

The instrument has been tested for radio frequency interference and is certified under EN61326.

WARRANTY

Cole-Parmer Ltd warrants this instrument to be free from defects in material and workmanship, when
used under normal laboratory conditions for two (2) years. In the event of a justified claim, Cole-Parmer
Ltd will replace any defective component or replace the unit free of charge. This warranty does not
apply if damage is caused by fire, accident, misuse, neglect, incorrect adjustment or repair, damage by
incorrect installation, adaption, modification, fitting of non-approved parts or repair by unauthorised
personnel. Cole-Parmer Ltd liability is limited to the cost of repair or replacement of the product and
excludes in particular, indirect and consequential loss, damage, costs or expenses, including but not
limited to wasted time, materials and expenditure or loss of use, profit, production, revenue, expected
savings or goodwill. To make a claim please contact the supplier of the instrument. This warranty is in
addition to, and does not affect any statutory rights.

This manual has been prepared for the convenience of Cole-Parmer’s customers and nothing in
this manual shall be taken as a warranty, condition or representation concerning the description,
merchantability, fitness for purpose or otherwise of the unit or components.

Notwithstanding the description and specification(s) of the instruments contained in the operator’s
manual, Cole-Parmer Ltd reserves the right to make such changes as it sees fit to the instruments or to
any of the components.

9

«
...
7
8
9
10
11
...
»

Содержание PCRmax Alpha Cycler 1

































































Отзывы:

Нет отзывов

Похожие инструкции для PCRmax Alpha Cycler 1

Бренд: MacDon Страницы: 17

Бренд: Olympus Страницы: 50

Бренд: VAHVA Страницы: 19

Бренд: Ecco Страницы: 2

Бренд: Landoll Страницы: 94

Бренд: Panasonic Страницы: 30

Бренд: ZIGBEE Страницы: 4

Бренд: CAIRE Страницы: 38

Бренд: Caframo Страницы: 72

Бренд: Konica Minolta Страницы: 32

Бренд: Ultrasonic Страницы: 33

Бренд: mychway Страницы: 56

Бренд: IKEA Страницы: 24

Бренд: GAPOSA Страницы: 32

Бренд: Vibration Research Corporation Страницы: 333

Wallach UltraFreeze

Бренд: Cooper Surgical Страницы: 4

SimNewB Anomaly Set

Бренд: laerdal Страницы: 10

Бренд: Nautilus Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды