Placing the eyepieces
•
Remove the cover of eyepiece tube
•
Insert the eyepiece into the eyepiece tube (picture D)
Locking the eyepieces
For models without diopter adjustment, please find the screw for locking the eyepiece on the tube ring (picture E).
Please note that location can be slightly rotated from model to model. For models with diopter adjustment, take out
the eyepiece (picture F) and look into the tube to find the right position of screw (picture G).
The eyeshades (optional)
Each eyepiece has a rubber eyeshade. This prevents damage to the lens, and stray light. The eyeshade can simply be
slipped over the eyepiece
Connecting the power cord
The MSU-600 series supports a wide range of operating voltages: 100 to 240 VAC. Please use a grounded power
connection
•
Make sure the power switch is off before connecting
•
Insert the connector of power cord into the power socket, and make sure it connects well
•
Insert the other connector into the mains socket, and make sure it connects well.
Do not bend or twist the power cord, it will get damaged.
Use the special cord supplied by Cole-Parmer. If it’s lost or
damaged, choose one with the same specifications
9
