13 \ USER OPERATION MANUAL:
Cole-Parmer Basic Ductless Fume Hood Series
14. Attach the power cord to the inlet on the right
side of the head unit and connect to
appropriate power source.
DWYER Equipped Units
15. Add airflow meter as follows:
o
Insert vane/film into the airflow meter.
a.
Slide out vane holder from side of meter
(just below the screw).
b.
Carefully remove vane from plastic bag
and cardboard envelope (two vanes are
enclosed, one is a spare). Hang the vane
by the wire in the two slots provided in
the vane holder.
c.
Slide the vane holder back into the meter.
o
The enclosure design allows the airflow meter
to be fitted to either side of the enclosure as
required.
Ensure that the side not to be used has the airflow
opening covered by the supplied blanking plate.
The side to be used should have an open hole to
fit the meter.
