Cole Parmer 16 Series Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 41

background image

29

Slower response than specified.

P Series Gauges and PC Series Controllers feature an RS-232 programmable Geometric Running
Average (GRA). Depending on the full scale range of the gauge, it may have the GRA set to enhance
the stability/readability of the display, which would result in slower perceived response time. Please see
“Pressure Averaging” and “Flow Averaging” on page 15.

Jumps to zero at low pressure.

P Series Gauges and PC Series Controllers feature an RS-232 programmable zero deadband. The
factory setting is usually 0.5% of full scale. This can be adjusted between NONE and 3.2% of full scale.
See “Display Zero Deadband” on page 15.

Maintenance and Recalibration

General:

P, PC, PCR and PCD Series Pressure Gauges and Controllers require minimal maintenance.

The devices are designed to measure CLEAN, NON-CORROSIVE gases and fluids.

Recalibration: The recommended period for recalibration is once every year. Providing that the CLEAN,

NON-CORROSIVE mantra is observed, this periodic recalibration is sufficient. A label located on the

back of the device lists the recalibration due date. The device should be returned to the factory for
recalibration near the listed due date. Before calling to schedule a recalibration, please note the serial
number on the back of the device. The Serial Number, Model Number, and Date of Manufacture are
also available on the Manufacture Data 2 display (see page 14).

Cleaning: P, PC, PCR and PCD Series instruments require no periodic cleaning. If necessary, the
outside of the instrument can be cleaned with a soft dry rag. Avoid excess moisture or solvents.

For repairs, recalibrations, or recycling of this product, contact:

Cole-Parmer Instrument Co.

625 E. Bunker Court

Vernon Hills, IL 60061

USA

Ph. 800-323-4340

Fax 847-549-7676

email: [email protected]

Website: www.coleparmer.com

«
...
27
28
29
30
31
...
»

Содержание 16 Series










































Отзывы:

Нет отзывов

Похожие инструкции для 16 Series

Бренд: Canon Страницы: 2

coviva Smartbox TKP100A

Бренд: hager Страницы: 4

Бренд: Vag Страницы: 12

Бренд: Rachio Страницы: 2

Бренд: nekos Страницы: 8

Бренд: nekos Страницы: 8

Бренд: Neles Страницы: 12

Бренд: Ultratec Страницы: 33

Бренд: Union Instruments Страницы: 63

Бренд: Reliance Foundry Страницы: 3

Бренд: Wesa Страницы: 8

Бренд: Phoenix Contact Страницы: 56

ESP32-C3 Series

Бренд: Espressif Systems Страницы: 30

Бренд: Nibe Страницы: 92

Бренд: CONCORD Страницы: 7

Бренд: Ultralife Страницы: 11

A Step AZ Series

Бренд: Oriental motor Страницы: 120

ID ISC.MU02.02-AD

Бренд: Feig Electronic Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды