Operating your Appliance
REMOTE CONTROL
All the functions performed with the Remote Control work identically
to the manual controls.
1.
Install two
“AAA”
batteries
2. Do not mix old and new batteries. Do not mix alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE
OR LEAK.
4. Always purchase the correct size and grade of battery most suitable
for the intended use.
5. Clean the battery contacts and also those of the device prior to
battery installation.
6. Remove batteries from equipment which is not to be used for an
extended period of time.
7. Remove batteries if consumed or if product is to be left unused for a
long time.
OSCILLATION
With the unit on, press the Oscillation Button
to start and stop the oscillation
function. The oscillation function can be used in any speed and/or timer mode.
TIMER FUNCTION (Figure 5)
The timer function may be activated when the unit display is in any function or speed.
This function allows you to set the length of time the unit will run before turning itself
off, from 1 hour to 8 hours.
Pressing the Timer Button
will increase the length of time by 1 hour each time this
button is pressed. After the display reflects 8 hours, pressing the Timer Button once
more will reset the unit to run continuously.
The unit will turn off when the set time has elapsed.
The unit can be turned back on by pressing either Power Button.
