WARNING:
In order to avoid overheating or fire, do not cover the heater.
WARNING:
Keep all objects at least 1 metre from the front, sides and
rear of the appliance.
WARNING:
Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING:
Never leave this heater unattended when in use.
Ensure heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off
position, insert the power plug into the mains outlet and switch on.
CAUTION:
Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will overheat
the plug and socket and could result in fire.
When the unit is initially plugged in, there will be a
“beep”
and the power light will
come on indicating that there is power to the unit.
The power light will remain lit until the unit is unplugged from the electrical outlet.
HEATER
Turn the heater ON by pressing the Heater Power Button
.
Upon turning the Heater on, the unit will be in High Heat (H3). (Figure 3).
Press the Heat Mode Button
for Medium Heat (H2).
Press again for Low Heat (H1).
Press a third time for Heater Fan Mode (HF). This activates High Heat (H3) and Super
Low Speed (F1) simultaneously.
Press a fourth time to return to High Heat (H3).
To turn the Heater OFF, press the Heater Power Button.
Operating your Appliance
Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This appliance
requires no installation, it should be used solely as a portable appliance.
