Coinco Guardian GLX Скачать руководство пользователя

Страница: 25 / 54

SECTION 4: TYPICAL USAGE

Cassette Configuration

Cassette configuration assigns which coins route to which payout tubes.

Your new Guardian

GLX

changer will already be configured for the factory cassette and coin routing.

This step of changing the cassette configuration is only necessary if:

•

a payout cassette has been replaced with a cassette containing different coin tubes, or coin

tubes in different positions.

•

individual coin tubes have been replaced (or moved).

There are two ways to assign coins:

1) Using a Standard Cassette,

2) Using a Custom

Configuration

If you do not plan to use all 6 coin tubes, leave tubes installed and

make sure to disable

coi

routing and coin level sensing for the appropriate tubes

. This is done by entering

“---“ when assigning coins

. S

ee Figure 30 for an example.

Tokens cannot be routed

using the Custom Cassette menu.

Using a Standard Cassette

If you are using a Standard cassette

find the cassette

configuration designation (such as BB. BD, etc.) and proceed to Figure 30 to enter this

cassette configuration. The Guardian GLX will automatically set the coin routing based on the

selected Standard cassette.

A list of the Standard cassette configuration designations are available from either

coinco.com or your local Coinco Sales Representative.

Using a Custom Con

figuration:

ustom configuration is any combination of tubes and/

or coin routing other than the standard cassette configurations. If you want to reconfigure

the payout tubes and have not already done so, please refer to

Changing the Payout Coin

Tube Configuration

before proceeding. After this has been done, you will need to

reconfigure the coin routing. See Figure 30.

On some Vendo and Dixie-Narco machines, certain changer setup modifications (tube

reconfiguration, changing coin routing, token additions/deletions) may not be recognized. If

this occurs, cycle power to the main controller board to correct the problem.

Programming the Coin Routing

Whenever the coin tubes are changed, the GLX must be reprogrammed to route coins to the

new tube locations. See Cassette Coinfiguration - Using a Custom Configuration.

Содержание Guardian GLX























































Результаты поиска

Содержание Guardian GLX

Отзывы:

Похожие инструкции для Guardian GLX

Бренды по названию

Популярные бренды

Coinco Guardian GLX, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Guardian GLX

Отзывы:

Похожие инструкции для Guardian GLX

Бренды по названию

Популярные бренды