Coinco Guardian GLX Скачать руководство пользователя

Страница: 14 / 54

SECTION 3: GENERAL CHANGER OPERATION

Housing Module

The Housing Module consists of the changer

housing and MDB harness. The backside of the

housing has three mounting holes for attaching

the Guardian

GLX

changer to the vending ma-

chine. The

changer's

cashbox coin chute is

also part of the housing.

Coin Tube Cassette

The coin cassette contains the six coin tubes

that store coins for change payout. The

center

slot

of the cassette

the

changer's

coin return

chute. Rejecte

d coins from the acceptor pass

through the center of the cassette assembly

and fall out the bottom of the coin changer.

Accepted coins are guided into the coin tubes.

Payout Module

The bottom of the Guardian

GLX

changer is the

Payout Module. Coins stored in the coin tubes

of the cassette are dispensed by the payout

module’s motor driven belt. The belt has two

pins attached to it, which engage a sweeper at

the bottom of each coin tube. When the

sweeper is engaged, one coin is released from

the coin tube. The acceptor module sends

information to the payout module for dispensing

coins from the cassette.

Coin Level Sensing

The Pulse-Echo coin level sensing method emits

and detects sound waves. The number of coins

is calculated by the amount of time it takes the

emitted sound wave to reflect o

f the coin stack

and return to be detected. (See Figure 16)

How often does the changer scan the

tubes?

The Guardian GLX will automatically scan

after any coin deposit or payout. It will also

scan after any “change in state”, e.g. when

the payout cassette is reinstalled or when

the sorting door is opened then closed.

I added one coin to a tube and the coin

level sensing did not detect it. Why?

The

Pulse-Echo coin level sensing method is

accurate to within

2 coins. It may not

necessarily detect a difference when a

single coin is added. This is normal and is

within the technology’s margin of error.

Does the Guardian

GLX

require tube

sensing calibration as with some other

models?

No, it does not require any calibration to

attain its level of accuracy.

Figure 16

Pulse-Echo Coin Sensing Technology

EMIT

RETURN

Содержание Guardian GLX























































Результаты поиска

Содержание Guardian GLX

Отзывы:

Похожие инструкции для Guardian GLX

Бренды по названию

Популярные бренды

Coinco Guardian GLX, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Guardian GLX

Отзывы:

Похожие инструкции для Guardian GLX

Бренды по названию

Популярные бренды