manualshive.com logo in svg

Coinco Guardian GLX, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Coinco Guardian GLX Скачать руководство пользователя страница 30

30

Password / Change Password & Level

1. Push 

MENU

button.

2. Scroll using arrow keys to screen below

SETUP
Password

▲

▼

Enter Password

_ _ _ _

▲

▼

Enter

Correct

▲

▼

Scroll

▲

▼

Scroll

▲

▼

Scroll

▲

▼

Scroll

PASSWORD
Chg Password

▲

▼

PASSWORD
Password Level

▲

▼

Incorrect

Incorrect 

Password

Enter Password

F E E D

▲

▼

 

Password = FEED

 

CANCEL or ENTER

Enter

Enter

PASSWORD LEVEL

LEVEL 1

▲

▼

LEVEL = LEVEL X
CANCEL or ENTER

Enter

PASSWORD LEVEL

LEVEL 2

▲

▼

PASSWORD LEVEL

LEVEL 3

▲

▼

▲

▼

Scroll

▲

▼

Scroll

▲

▼

Scroll

▲

▼

Scroll

▲

▲

▼

Scroll

▼

Scroll

Enter

First screen shows current 

setting.  Scroll to desired 

Level and 

ENTER

Advanced Con

f

iguration

This section explains the lesser-used features of the Guardian 

GLX

 changer. 

Password

The password section protects the more sensitive changer information.

Entering the Password

A password must be entered any time the user attempts to enter a password-protected area of the 

menu.  These include the Password area of the Setup menu, as well as the areas defined by th

e

 

Password Protection Level (see below).

The basics of Password operation are as follows:

1.

The default Password for most changer configurations is D-E-F-B

2.

The CANCEL button allows you to back up while typing the password, or to back out of the

Password screen entirely.

3.

Once the correct password is entered, it  allows access to the user’s original destination.

4.

There is no penalty for multiple incorrect password attempts; i.e. the screen does not lock out

access to non-password protected items.

Changing the Password

Passwords can easily be changed from the default.

Valid passwords are four characters and are any combination of the letters D, E, F, and B (the four 

arrow keys).  See Figure 3

4

 for how to change the password.

If the password has been changed from the standard D-E-F-B, and the user cannot remember 

what it is, the Password can be reset by using the Coinco FP-5 Field Programmer.

 SECTION 5: ADVANCED CONFIGURATION

Figure 34

Cancel or 

Enter

Cancel or 

Enter

▲

▲

▼

▼

SScrol

crolll

PASSWORD LEVEL

 

LEVEL 

4

Enter

Содержание Guardian GLX























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды