Coinco CoinPro 3, Руководство по эксплуатации и обслуживанию

Страница: 19 / 28

Page 19
Section 6: Troubleshooting
TROUBLE POSSIBLE CAUSE PROCEDURE REMEDY
Accepted quarters go Quarter coin tube Check to see that quarter coin Fill quater coin
to quarter coin tube when has less than 22 tube has a minimum of 22 tube with 22
Lo-$.25 switch is ON quarters quarters quaters to cover
Lo-$.25 sensor
Tube sensor board Replace tube sensor board Replace tube
with good tube sensor board sensor board
and test
If changer functions properly . . .
If coins still go to quarter tube . . .
Replace changer
main logic board
Credits coins but Coin return lever Make sure changer is mounted Reposition changer
does not escrow correctly and acceptor gate and/or vendor coin
opens when vendor coin return return lever
lever is operated
Acceptor Replace acceptor with good Replace defective
acceptor and test acceptor
If changer functions properly . . .
If still no escrow . . .
Replace changer
main logic board
No payout Payout solenoid Make sure solenoid wires are Plug solenoid wires
properly connected to changer into logic board
main logic board
If still no payout, replace solenoid
Replace defective
with good solenoid and test payout solenoid
If changer operates properly . ..
If still no payout . . .
Rplace changer
main logic board
If still no payout . . . Replace changer
main power harness
9302-GX TROUBLESHOOTING GUIDE