Installation Manual
11.0 Installation
30
o
Route the pigtail cable down through the nipple and attach the pigtail cable plug to the dome con-
nector.
o
Route the system cable down through the nipple and attach the system cable plug to the dome
connector.
o
Orient the dome properly and attach it to the Quick Disconnect mounted to the arm by engaging
the pins and rotating approximately 1/16 turn CW. Ensure that safety strap bolts are aligned
after rotation. See picture.
o
Reattach the safety strap.
Note: The top part of the Quick Disconnect is intended to remain in place after installation. If you
need to remove the camera, reverse the above process.
