background image

3

6X-1090D

About this document

The Operation Manual is a combined document for the Cohu Helios products and contains information on how 

to configure and operate camera systems using Helios Web Interface for 3960

HD

/3

960

SD

/3930

HD

/3930

HD-EX

3920

HD

/3

920

SD 

series

. The manual is shipped with the system or is available from the Cohu website at: 

• 

3960

HD

 

at 

www.cohu-cameras.com/products/3960hd.html

• 

3960

SD

 

at

 

www.cohu-cameras.com/products/3960sd.html

• 

3930

HD

 

at

 

www.cohu-cameras.com/products/3930hd.html

• 

3930

HD-EX

 

at

 

www.cohu-cameras.com/products/3930hd-ex.html

• 

3920

HD

 

at 

www.cohu-cameras.com/products/3920hd.html

• 

3920

sD

 

at 

www.cohu-cameras.com/products/3920sd.html

The information in this manual is subject to change without notice. Please refer to the above website for 
the latest information.

Additional information and documents related to the Camera

For information on the installation and maintenance of the following camera positioning systems see:

• 

3960

HD

 and 3960

SD

 - 6x-1089, the combined Installation manual

• 

3930

HD 

 - 6x-1092, the Installation manual

• 

3930

HD-EX 

 - 6x-1095, the Installation manual

• 

3920

HD 

and

 

3920

SD 

 - 6x-1097, the combined Installation manual. 

Manuals are available from the Cohu website listed above.

Copyright/Intellectual property rights statement

Copyright 2010 by Cohu Inc., Electronics Division. Cohu has intellectual property rights to technology em-
bodied in the product described in this manual.

FCC compliance

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful 
interference when the equipment  is operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio communications. Operation of this equipment in a 
residential area may cause harmful interference in which case the user will be required to correct the inter-
ference at his own expense. 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and (2) this device must accept any interference re-

ceived, including interference that may cause undesired operation. Changes or modifications to this device 

can void the user’s warranty. 

Support services

Please contact the Customer Service Department for technical assistance at :

[email protected] or 

(858) 277-6700 extension 5738

Содержание Helios 3920










































Отзывы: