Cognex In-Sight VC200, Справочное руководство

Страница: 40 / 57

Camera Specifications
Specifications ISC-8402 ISC-8405
Image Processing
Memory 512MB SDRAM
Sensor Type 1/1.8 inch CMOS, global shutter 1/2.5 inch CMOS, rolling shutter
Sensor Properties 9mm diagonal, 4.5 x 4.5µm sq. pixels 7.13mm diagonal, 2.2 x 2.2µm sq. pixels
Maximum Resolution
(pixels)
1
1600 x 1200 2592 x 1944
Electronic Shutter
Speed 20µs to 940ms 32µs to 1000ms
Acquisition Rapid reset, progressive scan, full-frame integration.
Bit Depth 256 grey levels (8 bits/pixel).
Lens Type C-Mount
Discrete Inputs None.
Discrete Outputs
1 strobe output line.
Status LEDs Network, 2 user-configurable.
Network
Communication 1 Ethernet port, 10/100/1000 BaseT with auto MDIX. IEEE 802.3af TCP/IP Protocol.
Serial Communication None.
Power Class 2 Power over Ethernet (PoE) device.
Power Type PoE Type A and Type B.
Power Consumption 6.49 W maximum per Class 2 PoE.
Current Per Class 2 PoE requirements.
Voltage 48VDC nominal, applied from a Class 2 PoE device, which is typically powered from some
other voltage.
Material Die-cast zinc housing.
Finish Painted.
Mounting Four M3 threaded mounting holes (1/4-20 and M6 mounting holes also available on
accessory mounting block).
Dimensions
31.0mm (1.22in) x 31.2mm (1.23in) x 75.1mm
(2.96in) without accessory mounting block.
39.0mm (1.54in) 31.2mm (1.23in) x 75.1mm
(2.96in) with accessory mounting block. 31.0mm (1.22in) x 31.2mm (1.23in) x 71.6mm
(2.82in) without accessory mounting block.
39.0mm (1.54in) x 31.2mm (1.23in) x 71.6mm
(2.82in) with accessory mounting block.
Weight
132.2 g (4.66 oz.) without accessory mounting
block
163.2 g (5.76 oz.) with accessory mounting
block 78 g (2.75 oz.) without accessory mounting
block
109 g (3.84 oz.) with accessory mounting
block
Case Temperature
2
0°C to 50°C (32°F to 122°F)
Storage Temperature -20°C to 80°C (-4°F to 176°F)
Humidity < 80% non-condensing
1
The number of image sensor rows are configurable and can be set within the In-Sight sing the number of rows will increase the number of
frames per second acquired by the camera. Refer to the
In-Sight
®
VC Explorer User Guide for more information.
2
Case temperature can be verified using the camera's Temperature property within In-Sight VC Explorer, which displays the camera's internal
temperature in degrees Celsius. The internal temperature will be ±5 degrees above the camera case temperature. Refer to the
In-Sight
®
VC
Explorer User Guide for more information. Additional cooling measures are required if the case temperature cannot be kept below 50°C.
Examples of such measures include: mounting the camera to a heat sink using the M3 mounting screws, reducing the ambient temperature
and ensuring there is air flow over the camera.
40
Specifications