Cognex In-Sight 3D-L4000 Series, Руководство пользователя

Страница: 4 / 16

Connect the Ethernet Cable
CAUTION : The Ethernet cable shield must be grounded at the far end.
Whatever this cable is plugged into (typically a switch or router) should have a
grounded Ethernet connector. A digital voltmeter should be used to validate
the grounding. If the far end device is not grounded, a ground wire should be
added in compliance with local electrical codes.
1. Connect the Ethernet cable's M12 connector to the vision system's ENET
connector.
2. Connect the Ethernet cable’s RJ-45 connector to a switch, router or PC, as
applicable.
4