2
1
Remove the cover from the lens mount.
Remove the front cover, if attached.
DataMan 500 ships with no lens installed. You must install either a
variable-focus liquid lens module or a standard CS-mount lens before
using your reader.
Remove the four mounting screws from
the corners of the front cover and remove
the cover.
Do not discard screws!
Do not leave the DataMan sensor
exposed to the environment!
WARNING
Make sure your reader is unpowered before installing the lens.
60 (2.36)
14.9 (0.587)
70.0 (2.75)
161.76 (6.37)
35 (1.38)
48.86(1.92)
47 (1.85)
38 (1.50)
mm (inches)
46.935(1.85)
97.99
(3.86)
110.38
(4.35)
27 (1.06)
Observe the following DataMan 500 dimensions when installing your
reader. The upper left image shows the illumination accessory.
To install a C-mount lens, it is optional to
remove the front cover.
*
*Dimensions of illumination accessory subject to change.
10 DataMan 500 Quick Reference Guide
DataMan 500 Quick Reference Guide 11
Installing the Lens
Dimensions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
