40 DataMan 500 Quick Reference Guide
DataMan 500 Quick Reference Guide 41
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. Operation of this equipment in a residential
area is likely to cause harmful interference, in
which case the user will be required to correct the
interference at personal expense.
Canadian Compliance
This Class A digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe A est con-
forme à la norme NMB-003 du Canada.
C-Tick Statement
Conforms to AS/NZS CISPR 22/ EN 55022 for Class
A Equipment.
European Compliance
The CE mark on the product indicates that the
system has been tested to and conforms to
the provisions noted within the 2004/108/EEC
Electromagnetic Compatibility Directive and the
2006/95/EEC Low Voltage Directive.
For further information please contact:
Cognex Corporation
One Vision Drive
Natick, MA 01760
USA
Cognex Corporation shall not be liable for use
of our product with equipment (i.e., power
supplies, personal computers, etc.) that is not
CE marked and does not comply with the Low
Voltage Directive.
Laser Safety Statement
Compliance with FDA performance standards
for laser products except for deviations
pursuant to Laser Notice No. 50, dated June
24, 2007.
This device has been tested in accordance
with IEC60825-1 2nd ed., and has been certi-
fied to be under the limits of a Class 2 Laser
device.
Use of controls or adjustments or perfor-
mance of procedures other than those speci-
fied herein may result in hazardous radiation
exposure.
UL and cUL Statement
UL and cUL listed: UL60950-1 1st ed. and CSA
C22.2 No.60950-1 1st ed.
For European Community Users
Cognex complies with Directive 2002/96/EC
OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 27 January 2003 on waste electrical
and electronic equipment (WEEE).
This product has required the extraction and use
of natural resources for its production. It may
contain hazardous substances that could impact
health and the environment, if not properly
disposed.
In order to avoid the dissemination of those sub-
stances in our environment and to diminish the
pressure on the natural resources, we encourage
you to use the appropriate take-back systems
for product disposal. Those systems will reuse or
recycle most of the materials of the product you
are disposing in a sound way.
The crossed out wheeled bin symbol informs
you that the product should not be disposed of
along with municipal waste and invites you to
use the appropriate separate take-back systems
for product disposal.
Compliance Notice
The DataMan 500 series meets or exceeds the
requirements of all applicable standards organi-
zations for safe operation. However, as with any
electrical equipment, the best way to ensure safe
operation is to operate them according to the
agency guidelines that follow. Please read these
guidelines carefully before using your device.
Regulator
Specification
USA
FCC Part 15, Class A
FDA/CDRH Laser Notice No 50
Canada
ICES-003
European
Community
EN55022:2006 +A1:2007, Class A
EN55024:1998 +A1:2001 +A2:
2003
EN60950
EN60825-1
Australia
C-TICK, AS/NZS CISPR 22 / EN
55022 for Class A Equipment
Japan
J55022, Class A
FCC Class A Compliance Statement
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference when the equip-
ment is operated in a commercial environment.
This equipment generates, uses, and can radiate
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
