Cognex Checker 3G Series, Руководство пользователя

Страница: 23 / 25

44 45
A
B
B
A
C
C
1/4-20 UNC
M6 x 1.0
∅ =
7.14 (0.281)
20 (0.787)
19 (0.75)
25.4 (1.0)
A
B
C
mm (in)
Mounting Checker
Caution: Do not use a mounting screw with an exposed thread depth of greater
X
than 5mm. Allowing the mounting screw to bottom in the mounting hole can
damage Checker.
Caution: The maximum torque for a mounting screw is 1.8 nM (16 inch-pounds).
X
Exceeding this torque value can damage Checker.
Mounting Checker at a slight angle can reduce reflections from your part’s surfaces, improving
performance Adjust the mounting angle to provide the clearest image of the part features you are
checking
The optional Checker mounting bracket lets you easily position and adjust Checker on your line