Connecting water to machine, (over cabinet).
6.
Connect attached water hose to cold water with an R 1/2”.
Make sure that the water hose not are kinked anywhere when machine is pushed
into place.
Please flush the water hose before connecting to machine, this to avoid any particles to
damage the inlet valve.
7.
.
Open the water inlet.
8.
Turn on the switch inside the door.
Water is been filled into the tank
automatically with 2,4 litres of water.
The heating will not start before the water
level reaches the level sensor.
Set temperature is approx. 97ºC.
9.
Close door.
10.
When the water is heated
to right
temperature the message
”Low temp”
will disappear.
”Please wait”
11.
Turn off the machine.
.
10
.
4. Installation and start.
Royal
ON / OFF
Switch
ON/OFF
