5.
3. Installation and starting.
1.
T
he hot water automat will now start to fill and heat the water.
1.1. The display will flash when the automat fills with water
1.2
. While the machine is heating the water the display shows the actual
temperature until the pre-selected temperature is reached.
1.3. The display light stays on
when the water has reached
the preset temperature of 90
o
C.
1.4.
The hot water automat is now ready for use.
The operating temperature of the hot water automat is preset at the factory.
2.
Setting the water temperature.
2.1. Adjust the water temperature using the membrane
switch. Max temperature 96ºC.
2.2. Increase the temperature.
2.3. Reduce the temperature.
