background image

FILTRATION & PROCESSING  SOLUTIONS

INSURICE PF SYSTEMS INSTALLATION AND OPERATION GUIDE

DESCRIPTION

Everpure Insurice PF Series Water Filter Systems are identical to standard Insurice systems except that the PF Series systems 

include a 20-inch (50.8 cm) sediment prefilter housing pre-installed and assembled onto the inlet header/manifold assembly. 

Insurice PF systems are designed for use in installations with dirtier, cloudier source water and incorporate the same Everpure 

Insurice 1⁄2-micron quick-change precoat filter cartridges (i2000, i2000

2

, i4000 & i4000

2

) which remove (by mechanical means*)

potentially harmful particulates and chlorine taste and odor from the water while introducing an advanced scale inhibitor (as 

tested by Everpure).
The replaceable prefilter cartridge element removes larger dirt and rust particles and extends the life of the sub-micron 

carbon filters by mechanical means*. Thus, ice quality and ice machine performance are improved while machine downtime, 

maintenance and energy costs are substantially reduced.
*See individual product specification sheets for performance claims and FIFRA registration information.

SELECTING A MOUNTING LOCATION

1.  Give consideration to the weight of the unit when operating (filled with water). Operating weights of the Insurice PF systems are:

•  Single System - 19 lbs (8.62 kg)
•  Twin System - 35 lbs (15.9 kg)
•  Triple System - 45 lbs (20.4 kg) 

2.  The location should allow for:

•  Minimum clearance of 2.5 inches (6.3 cm) under the cartridge(s) so it can be lowered for removal and replacement.
•  Adequate space for “in” and “out” water line connections.
•  Be near a drain for flushing.

DIMENSIONS

14 inches

(35.5 cm)

INLET

3/8-inch FNPT

Primary 

Filter

Cartridge

Prefilter

(Inside Sump)

25 inches

(63.5 cm)

Outlet

3/4-inch 

FNPT

21.5 inches

(54.6 cm)

INLET

3/4-inch FNPT

25.59 inches

(64.9 cm)

Outlet

3/4-inch 

FNPT

25.75 inches

(65.4 cm)

INLET

3/4-inch FNPT

29.59 inches

(75.1 cm)

Insurice PF Single System

Insurice PF Twin System

Insurice PF Triple System

Insurice PF Single System

Insurice PF Twin System

EVERPURE

®

 

INSURICE

®

 PF FILTER SYSTEMS

Insurice PF Triple System

Содержание EVERPURE Insurice PF Series

Страница 1: ...ance are improved while machine downtime maintenance and energy costs are substantially reduced See individual product specification sheets for performance claims and FIFRA registration information SELECTING A MOUNTING LOCATION 1 Give consideration to the weight of the unit when operating filled with water Operating weights of the Insurice PF systems are Single System 19 lbs 8 62 kg Twin System 35...

Страница 2: ...e raised stub in the bottom of the bowl 7 Check to see that the o ring is in place at the top of the prefilter bowl and that it is lubricated with food grade silicone lubricant Install the bowl by aligning the hole in the top of the cartridge with the stub extending down from the housing head and threading the bowl onto the head Hand tighten snugly Do not over tighten the bowl 8 Remove the wrappin...

Страница 3: ...ws and regulations Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts Not for residential use For food service applications only REPLACEMENT PARTS Contact your local Pentair Everpure dealer for filter cartridges ...

Страница 4: ...d notify Pentair Everpure technical service at the phone number listed below Any part found materially defective within the terms of this warranty will be repaired or replaced at PFS s discretion by your local dealer or Pentair Everpure technical service You pay only freight from our factory and local dealer charges Any item repaired or replaced pursuant to this warranty will be covered under the ...

Отзывы: