4. Installation.
Queen Aqua Table Top
WATER LINE
Queen Aqua Table Top Installation
1.
Place the machine on a level and waterproof surface.
2.
Install the machine using the water regulator, elbow
connections, water hoses and gas dome supplied.
(Use a spirit level where necessary and adjust with the
adjustable feet).
3.
Make sure that there is free movement of air behind the
machine. Min. 10 cm.
IMPORTANT!
The machine must be disconnected from the mains when
work is done on it.
Pull the power supply cable out of the wall socket.
It is the end customer’s / user’s responsibility to arrange the
water connection to the machine according to the
manufacturer’s instructions.
NOTE
WORKING WITH THE CONNECTIONS
Hold the connection and press the hose into the
connection’s body as far as possible.
Disconnecting the John Guest connection
Push the grey ring towards the connection and pull out the
hose.
If the water hoses need to be cut, make a straight cut to
prevent leakage.
7.
The installation shall be performed by an authorised installer.