4. Installation.
Queen Aqua
WATER LINE
6.
Queen Aqua installation
Install the machine using the water hoses and gas dome
supplied.
4.
Undo the service hatch (A).
5.
Mount the gas dome (B) on the carbon dioxide bottle and
then fit the nipple supplied on the gas dome.
Connect the carbon dioxide bottle (C) to the chiller unit.
See 1. (Carbonated water).
6.
Connect the hose from the water filter (D) to the chiller
unit. See 2. (Cold water).
7.
Connect the ½” hose supplied to the machine (E) and
then to the mains water supply.
The most appropriate connection is to a tap that can be
turned off.
Check to ensure that no kinks or sharp bends are formed on
the hoses during connection.
Water IN
8.
Insert the plug in an
earthed 230 V 10 A wall
socket.
9.
Flush out approximately 2.5 litres chilled water and
then approximately 2.5 litres carbonated water before
the machine is taken into use.
C
A
water filter with
regulator.
B
E
Connected to
the carbon
dioxide bottle
The installation shall be performed by an authorised installer.
D