Coffee Laboratory LSG 33 Скачать руководство пользователя страница 11

Страница: 11 / 14

CLEANING

BEFORE ANY CLEANING ROUTINE GRIND AND MAKE SURE NO BEANS
OR POWDER ARE IN THE GRIDNER.

DISCONNECT THE GRINDER POWER SUPPLY.

NEVER USE RUNNING WATER FOR THE CLEANING PROCEDURE.

USE ONLY PERFECTLY CLEAN CLOTHS OR BRUSHES TO CLEAN THE
GRINDER.

DO NOT USE ABRASIVE CLEANING PRODUCTS AS THEY MAY
SCRATCH GRINDER’S FINISHING.

Cleaning the bean hopper

Release the top cover screws (4 screws on each top right and left side of the
grinder)

Release the 2 beans hopper screws (located on its back side)

Pull out the beans hopper and rinse it thoroughly with water and soap.

As the beans hopper is made of ABS, use only liquid detergent (free of
abrasive components) and soft sponge.

Before reinstalling the beans hopper, make sure it is thoroughly dried.

Cleaning the grinding chamber

Before starting the thorough cleaning procedure of the LSG33 coffee grinder,
read the complete set of instructions.

Refer to the previous paragraph 8 in order to disassemble the grinding knob

Refer to the below steps 1-8 in order to disassemble the grinding core

Use a cross screwdriver to release the 4 screws that secure powder chute to
the front cover.

Use a flat screwdriver to release the 4 screws of front cover and pull it gently
out.

Make a note and mark the wiring connection order with the main switch and
then release the 4 wires

Coffee Laboratory 589 Rappahannock Drive White Stone Va 22578 TEL (804) 435-5522 www.coffeelabequipment.com

Содержание LSG 33















Результаты поиска

Содержание LSG 33

Отзывы:

Похожие инструкции для LSG 33

Бренды по названию

Популярные бренды

Coffee Laboratory LSG 33, Руководство по эксплуатации

Результаты поиска

Содержание LSG 33

Отзывы:

Похожие инструкции для LSG 33

Бренды по названию

Популярные бренды