Cofem London, Руководство пользователя

Страница: 32 / 40

32
As we can see in the picture, to go to another step we have to press ENTER, so when we’ll be at the correct
display we would select the necessary relay or type.
3.2.3.4.3.3.- Function mode relay.
This option is used to fix the features of the relays installed like the delay, day detection activated: with or
without delay, night detection activated: with or without delay, Call point activated at day: with or without delay,
night Call point activated: with or without delay and general activation.
hen we are in the relay menu/4 display.-Function and we have press ENTER (as we can see in the last
picture) we can get into the display and select the one relay we want configure, pressing again ENTER to confirm
that selection.
•
Delay:
MENU RELAY
3.Type
=
ENTER
+
Nº relay: 2
SIREN
ENTER
+
MENU RELAY
3.Type
ENTER
+
1
SIREN
+
1
2
4
The route to access into this menu is:
Menu/5.-System/3.-Menu relay/3.-Type
Here we will select the relay to assign a type function
In this option we can select with the arrows the different types
according Standards.
.
= Nº relay: 2
SIREN
ENTER
+
Nº relay: 1
SIREN
+
3
We can change from one to other.
ENTER
+
MENU RELAY
=
01
MENU RELAY
4.Function
ENTER
+
4.Function
ENTER
+
=
Nº relay: 1 Nº relay: 1
Delay 00:00 Delay 00:00
ENTER
+
=
Nº relay: 1
Delay 00:00
Minutes Seconds
With those arrows we can increase and decrease minutes and seconds according the neededs.