Coemar REFLECTION LEDko EXT, Руководство пользователя

Страница: 28 / 32

28
10
. Accessories and Spare parts
All the components of
LEDko EXT
are available as spare parts from your
Coemar
dealer or Ser-
vice. Accurate description of the fixture, model number and type will assist us in providing for your
requirements in an efficient and effective manner.
11
. Maintenance
11.1
Firmware update
The firmware of
LEDko EXT
can be updates through the RDM protocol (ANSI E1.20). Contact
Coemar assistance to receive the software and the device updater.
11.2
Periodic cleaning
Lenses
Even a thin layer of dust can reduce the luminous output and alter the consistency of the beam.
Regularly clean all filters and lenses using a soft cotton cloth, dampened with a special lens
cleaning solution.
Cleaning of the unit
Use a soft brush or a common vacuum cleaner or a source of compressed air for removing dust.
For the cleaning of the housing use a soft cloth and a non-aggressive cleaner. Check that the
internal fans and heat exchanger must be perfectly clean.
11.3
Periodic controls
Mechanical components
Check the correct working of the mechanical parts and, if needed, replace them. Make sure the
projector is not mechanically damaged. If necessary, replace the worn parts.
Electrical components
Check all electrical connections, in particular for correct grounding and correct attachment of
all extractable connectors. Press the connectors if necessary and reposition as before.
11.4
Fuses
LEDko EXT has an automatic fuse that in most cases does not need to be replaced.
Accessory name Code
Small yoke 357LAM_036
Side handle MA05