Coemar REFLECTION LEDko EXT, Руководство пользователя

Страница: 11 / 32

11
4.4 Optical group, framing system and gobos
Follow these steps in order to configure the optical group properly:
1.
Remove the two screws “ C ” placed on both sides of the optical holder tube;
2.
Gently remove the optical holder tube “ D ” pulling it away from the body;
3.
Loose the thumbscrews “
E
” of the two lenses to set them at desired position. Turn on the
fixture and check if the desired focus and zoom lever are correct, then tighten the thumb -
screws;
4.3
Adjusting unit’s tilt
1.
In order to adjust the tilt of the unit simply loose the side screw “ B ” on the yoke, adjust the
tilt and lock the yoke by tightening the screw again.
C
D
E
B