English
ProSpot LX
utilises a Philips MSD 250W/2 or equivalent.
The lamp is available from your authorised
coemar
sales agent:
coemar cod.
105214/1
power
250 w
luminous flux
18.000 lm
colour temperature
8.500° K
lamp base
GY 9,5
approximate life
2000 hours
The fixture’s internal temperature can reach 150° C after 5 minutes with a maximum peak of 350° C; ensure that the lamp is
cold prior to attempting removal. The fixture should be allowed to stand and cool for 10 minutes prior to its removal.
The lamps are part of the mercury vapour family of discharge lamps and must be handled with great care. The lamps opera-
te at high pressure, and the slight risk of explosion exists if operated over their recommended lamp life.
We recommend, therefore, that the lamp be replaced within the manufacturer’s specified lamp life.
installing the lamp
1) Using a Philips head screwdriver, remove the 4 screws
A
located at the front and rear of the projector, which affix the top
cover
B
, as shown in the diagram below.
2) Remove the housing
B
.
3) Remove the three thumbscrews
C
, which hold the lamp-
cover in place, and remove the cover.
Attention
Disconnect mains prior to opening up the unit
4. Lamp: Installation and replacement
