Coemar ProSpot 150 LX, Руководство пользователя

Страница: 31 / 36

31
English
Replacing gobos
Gobos may be replaced as required to produce special effects as required.
Gobo replacement should always be carried out with the power to the unit shut off and the rear cover removed as described above.
1) Rotate the gobo wheel until the desired gobo is visible.
2) Rotate the colour wheel until the empty slot of the colour wheel is lined up with the gobo selected in step 1.
2) Remove the retaining ring, then remove the gobo and replace as required
3) Replace the retaining ring making sure that it is seated correctly on the surface of the gobo.
4) After having replaced gobos as required,replace the ABS rear cover and refasten the screws.