Coemar LEDko EXT FullSpectrum RGBLA, Руководство пользователя

Страница: 14 / 33

14
Warning!!
The use of a thermal/magnetic circuit breaker is recommended. Strict adherence to regulatory norms is
strongly recommended.
LEDko EXT FullSpectrum RGBLA should not be powered through a dimmer as this may damage the
internal switching power supply.
Prior to connecting the device to mains power, ensure that the mains characteristics are within the rec-
ommended range for the use of
LEDko EXT FullSpectrum RGBLA
.
All cabling and connections should be carried out by a suitably qualified personnel.
Warning!
Make sure that screening and conductors are not in contact one another or with the metal housing of the
connector. Pin#1 and housing never must be connected to the power supply unit.
6.1
Control signal connection by XLR5 plugs
The digital control signal is transmitted to the projector via a two pole cable screened as per International stan-
dards for the transmission of DMX 512 data. The connection must be serial, using connectors XLR5 male and
female located on the back of LEDko EXT FullSpectrum RGBLA labelled DMX512 IN e OUT (see diagram).
Connectors equipped on
LEDko EXT FullSpectrum RGBLA
are IP rated, which ensures protection against
water and dust. In order to keep this rating they must be connected exclusively to other IP rated connectors.
6
. Control signal connections
DMX IN
DMX OUT