Coemar LEDko EXT FullSpectrum RGBLA, Руководство пользователя

Страница: 11 / 33

11
4.4 Optical group and framing system
Follow these steps in order to configure the optical group properly:
1.
Remove the two screws “
C
” placed on both sides of the optical holder tube;
2.
Gently remove the optical holder tube “ D ” pulling it away from the body;
3.
Loose the thumbscrews “ E ” of the two lenses to set them at desired position. Turn on the fixture and check
if the desired focus and zoom lever are correct, then tighten the thumbscrews;
4.3
Adjusting unit’s tilt
1.
In order to adjust the tilt of the unit simply loose the side screw “ B ” on the yoke, adjust the tilt and lock the
yoke by tightening the screw again.
C
D
E
B