Coemar Infinity Spot M, Инструкция по эксплуатации

Страница: 21 / 30

English
23
10. Operating on inside groups
The fixture allows the extraction of both gobos and colour changer assemblies in order to facilitate inspection, gobos replacing and clearing of
colour filters and lenses.
WARNING !
The following procedures should be undertaken by qualified and experienced technical personnel.
Handle with extreme care !
Always disconnect al cables before proceeding and ensure that the unit is sufficiently cool.
10.1 How to open the projector
Using an appropriate screwdriver, remove screws “A” from the upper housing and remove this. In order to identify the upper housing to be removed,
position the unit so that the printing on the lamp holder group can be read (the printing must not upside down). Once this operation has been carried
out, block the movement of the body through the specific device and proceed with the removal of the upper housing.
10.2 How to extract the gobos and colour changer assembly.
1. Remove “B” screws of the connectors labeled “gobos” and “color changer” and gently remove the “C” connector.
2. Remove “D” screws of the two assembly, manually shift forward the zooms lenses.
3. Gently extract a few centimeters the gobos assembly, tilt it forward.
4. Now, gently extract the colour changer assembly.
5. Finally extract the gobos assembly partially extracted in the step above..
A
B
C
D