Coemar Infinity Spot M Скачать руководство пользователя

Страница: 12 / 30

English

standard dimmer (mechanical)

0 - 10

0% - 4%

the mechanical dimmer works in sync with the dimming of the lamp

11 - 30

4% - 12%

the mechanical dimmer has no effect and is active only that the
halogen lamp (variable color temperature)

31 - 249 12% - 98%

black-out of the light beam during PAN/ TILT movement, gobos
wheel,
colors wheel and effects wheel

250 - 255 98% - 100%

no effect

0 - 10

0% - 4%

proportional movement of the gobo wheels through 360°

11 - 133

4% - 52%

proportional-stepmovement of the gobo wheels through 360°

134 - 255 53% - 100%

park, no function

0 - 10

0% - 4%

lamp off

11 - 29

4% - 11%

pan and tilt reset (once only)

30 - 65

12% - 25%

all motor reset exept black out pan and tilt (once only)

66 - 100 26% - 39%

all motor reset exept black out (once only)

101 - 135 40% - 53%

reset of all the motors (once only)

136 - 170 53% - 67%

LCD display off

171 - 185 67% - 73%

LCD display on

186 - 199 73% - 78%

lamp on - standard focus

200 - 228 78% - 89%

lamp on - autofocus

229 - 255 90% - 100%

Edition: 2

lamp on/ off and

motors reset

gobo effec t selec tion

step

Note 5 : when using halogen lamp, channel 22 (16 bit) / 21 (8 bit), allow the selection of the curve which can be a combination of the characteristic dimming lamp and/ or
mechanical dimmer

Date: 20/ 06/ 2011

Table name: DMX 512 functions

step

T able number: 294

Projec tor:

InfinitySpot M

Note 8: the lamp on/ off function can only be effected if an opposite level is set

Note 6: the display panel may be used to disable the switching off of the lamp via DMX

Note 7: turning off the lamp and all reset functions are delayed by 6 seconds to prevent accidental activation

halogen dimmer c urv e

(effect varies depending upon channel 6

dimmer)

step

8. Display panel functions

By suitably using all the functions of

Infinity Spot M

, which

can be activated through its display panel, it is possible to change some of the

parameters and to add some functions.
Changing the preset settings made by Coemar can vary the functions of the projector so that it will respond differently to the controller; therefore
carefully read about the functions described hereunder before carrying out any possible selection

8.1 Quick guide to menù

In order to access the functions, just press the menu button: the screen you see hereunder, divided into four sections, will appear; the sections will
be shown cyclically, one by one, every time the + or – button is pressed. To select the desired function, press

enter

8.2 Rapid count

By the display panel of

Infinity Spot M

It is possible to rapidly change the various numbers displayed for the different functions in the following 3

manners:

Pressing the + or – buttons will cause the count to be quicker.

Pressing first + and then – and then holding them down simultaneously will cause the numbers to jump to the highest value.

Pressing first – and then + and then holding them down simultaneously will cause the numbers to jump to the lowest value.

DISPLAY SETUP

allows the management

of:

brightness

positive or negative graphic

backlight shutdown time.

buttons shutdown time.

180° reading of the display

MAIN FUNCTIONS:

groups the main setup

functions of the fixture: pan/tilt
management, lamp

management, fans

management, reset, motors test, ID code,
back to original settings and access to
“SPECIAL MODE “.

MEASURES

allows the reading of all

functional settings of the fixture:
temperatures, fans power, DMX channels
values, diagnostics, lamp status and life
and diagnostic version of the installed
software.

DEMO

allows the performing of the

demonstration program. 4 different demo
programs are available.

DISPLAY

SETUP

MAIN

FUNCTIONS

MEASURES

DEMO