9.3.2. Setting individual channel output voltage limits
Sets a maximum output voltage (between the maximum output voltage and 180V) which the selected channel can achieve.
Suitable if the dimmer is located close to the generator or sub-station by preventing lamp failure due to over-voltage supply.
9.3.3. Setting channels to on/off operation (switching)
Allows selected channels to be set to on/off only. The channel will remain off up to 50% and on from 50% to 100%, it will
not allow the voltage to be regulated to any other value.
switching
(on/off) or
dimming
menu is
displayed
function display
Press the
+
or
-
buttons until
FUnc
is displayed
To confirm your selection
Press the
enter
button
Function menu displayed
function display
Simultaneously press the
menu
and
enter
but-
tons
DIGIfactor
club
6x2,5Kw
turns on
Power up
DIGIfactor
club
6x2,5Kw
To confirm your selection
Press the
enter
button
You may reduce the voltage down to 180V
function display
Press the
+
or
-
button
Maximum output voltage is selected.
function display
Press the
enter
button
For example, channel
4
function display
Press the
+
or
-
button to select the required chan-
nel
To confirm your selection
Press the
enter
button
Maximum output voltage menu displayed
SEtv
function display
Press the
+
or
-
button
To confirm your selection
Press the
enter
button
Function menu displayed
function display
Simultaneously press the
menu
and
enter
but-
tons
DIGIfactor
club
6x2,5Kw
turns on
Power up
DIGIfactor
club
6x2,5Kw