Coelbo SPEEDMATIC 1307 Скачать руководство пользователя страница 11

Страница: 11 / 44

To start configuration sequence push

MENU

during 3”.

By mean of the

START/STOP

push-button is v

(0/1) it can be changed. Press ENTER for validation.

erified the rotation sense. By mean of keys

By mean of keys

we can increase the lower limit of the speed of rotation of the pump´s

motor.

If the installation does not have level probe press

ENTER

to validate NO.

If the installation has a level probe, use keys

to change NO by YES.

Being inside configuration menu we are having access to the phase of programmation.

This will be the system operating pressure. Use keys

to modify the initial value (2 bar).

WARNING ! The input pressure must be al least 1 bar lower than the maximum pressure of
the pumps.
NOTE

: In case of group assembly, all the system operates at the pressure set in the MASTER device,

so that the configuration of set pressure in the slave device is superfluous.

By mean of keys

input the nominal current intensity value in A of the pump, enabling the

thermal protection. This value is located over the characteristics plate of the motor. Press

ENTER

for validation. (Is recommended to enter a current vaule 15% higher than the nominal value).

There are 2 view modes to choose:

NORMAL

: it is visualized “P LINE” (real pressure of the installation) and “INPUT P” (configured

pressure).

SERVICE

: it is visualized “Hz” (working frequency of the inverter), “SET” (configured pressure),

“P.LINE” (real pressure of the installation) y “FL” (flow sensor state).

TIMER STOP

default value is 5”. This will be the employed time by the system in stopping once

ceased the consumption in all the installation. Using keys

we can modify the initial value.

The default value is 0,6 bar. This value of pressure is substracted to the system setpoint, resulting
the final pressure to which the system will set in motion the pump when the hydraulic network has
a demand. Use keys

to modify the initial value. It is recommended to maintain this value

between 0,3 and 0,6 bar. Example:

Input pressure: 2 bar.

Differential start: 0,3 bar

Final start pressure: 2 - 0

,6 = 1,4 bar.

By mean of keys

we can choose the languages: “LANGUAGE ENGLISH”, “LANGUE

FRANÇAISE”, “LINGUA ITALIANA” and “IDIOMA ESPAÑOL”.

The SPEEDMATIC is configured by default as “SLAVE”.

In case of individual assembly just confirm “SLAVE” by pushing

In case of group assembly (M-S), we will do the same for the slave device. For the

“MASTER” device we will change “SLAVE” by “MASTER” pushing

In case of assembly of more than 2 devices, we will change “SLAVE” by “SWITCHER”

pushing

twice - see instructions of our station

SPEEDCENTER.

ENTER

It allows to set the communication channel whe the sation

SPEEDCENTER

is connected. Push

ENTER

After pressing

ENTER

pushbutton, the system will remain configured showing the type of view

chosen in the previous section 11. Press

AUTOMATIC

in order to quit manual mode.

In case of group assembly press

AUTOMATIC

only in the device configured as MASTER.

LINE SET P
00,0 bar 00,0 bar

PROGRAMMING MENU

SET PRESSURE
02,0 bar

TIMER STOP
5 s

DIF. START
0,3 bar

MAX. INT. PUMP

OFF

ROTATION SENSE

MIN. SPEED

LEVEL PROBE

0 0 Hz

15 Hz

LANGUAGE
ENGLISH

SET UP MENU

P. LINE SET P
00,0 bar 00,0 bar

VIEW MODE

SERIAL CONTROL

DIRECTION

NORMAL

SLAVE

CH: 1

Being inside configuration menu we are having access to the phase of installation.

MENU

ENTER

3”

In case of group assembly, after pressing AUTOMATIC in the MASTER device, the AUTOMATIC LED LIGHT of the SLAVE device
will start to flash intermittently, indicating that communication between both devices is ready. If this does not happen verify the
connection (fig 7).

OFF

CONFIGURATION

Using

we can change the values and push

ENTER

for validation. After every

ENTER

are sequenced the successive messages that make

up the configuration process.Whenever we want to quit the configuration sequence press

MENU

being saved the modified parameters untill this

point.