Codelocks Support
KL1000 NetCode - Getting Started Installation
Instructions and Quick Start Guide
The KL1000 NetCode supports date/time sensitive NetCodes which can be generated via the NetCode Portal.
You must have access to a browser with internet access to set-up NetCode.
Special Notes
Please read carefully:
Before installing the lock, load the batteries and familiarise yourself with the operation and programming.
The handle will not turn until you enter the factory default Master Code 11335577 or the User Code 2244.
Visit
to proceed with the set-up. Note that you will need to register for an account
if you do not already have one.
Once signed-in, choose Add Lock. As part of the initialisation process, you will be given a program string
to enter into your lock. When displayed, this should be entered immediately.
Your KitLock is supplied ready to fit to doors up to 19mm (3⁄4") thick. For doors between 19mm (3⁄4") and
25mm (1") thick, you will need to install the 28.5mm (1 1⁄8") spare spindle (see below). A 12mm (1⁄2")
spindle is also included for sheet metal doors.
