Public & Private Functions
Although the KL1000 NetCode is intended as a NetCode lock, the KL1000 NetCode does support traditional
Public & Private Functions. Documentation for these functions can be found at
Factory Reset
You may need to reset your lock to factory settings if you want to re-register the lock on the NetCode Portal or
have forgotten the Master Code.
1. Remove the rear-fixing bolt and swing the lock over the edge of the door to reveal the battery compartment.
2. Remove one battery.
3. Press and hold the 1 button.
4. Replace the battery whilst continuing to hold the 1 button. The Blue LED will flash twice.
5. Release the 1 button.
6. Within three seconds, press the 1 button three times. The Blue LED will flash three times and the lock will
have reverted to factory settings. The Master Code will now be 11335577, the lock will be in Private
Function and the User Code will be 2244. All other settings will be erased and reset.
Installation Guide Steps
KL1000 NetCode can be fitted to:
A. Cabinets, cupboards and lockers etc. as a direct replacement for existing cam locks.
B. It can also be fitted easily to cupboards and cabinets that do not have an existing locking device.
KL1000 NetCode can be supplied vertically and left or right hand horizontal.
