Code PHANTOM 1024, Руководство пользователя

Страница: 35 / 46

Phantom_1024_V2.023_en.PDF http://www.codelight.com 29
7.6. Rename Preset, Playback and Group
To rename Preset, Playback or Group, you need to press the Blank key to enter “Other Setup” mode, and press S3
[Set Labels], then select the needed option and rename it by using the 1
st
-26
th
button in the Unit section as the 26
English letter keys and the NUMBER keys in the Numeric keypad. (Press Shift in the Numeric keypad to
capitalize the 26 English letters). The * button is the blank key.
7.7. Set up the Channel Level
You need to press Channel in the Numeric keypad to enter “Channel Level”. The default mode is “Unit
Channels”, all the Units. You can press [Select Unit] or [Load a Group] to select different objects of channels.
You can enter numeral value to complete the assigned dimmer channel, or you can set up a output value to a
group of fixtures.
7.7.1. Control the designated Unit Channel
Press S1 [Select Unit], use cursor keys to select the needed Unit (if you need all the Units, select [Unit
Channels]), press S6 [Return] to return to the previous interface after selection. Use Numeric keypad to
select the corresponding range of dimmer channel, press S3 [Set Level] to enter a specific setup. If you
only need to set them as maximum or minimum value, you can directly press [Set Level = Full] or [Off
Level = 0] after you select the dimmer channel. For continuous increase or decrease the output value, you
can press [Level +] or [Level -].
Example:
Set the level of Channel 5-20 as 128.
Press Channel to enter “Channel Level”;
Select [Unit Channels];
Input the first channel 5, press Thru (for range selection) in the Numeric keypad, then Input the last
channel 20, press AT and the LCD screen will display “set to”, then you enter 128;
Press Enter to complete.
7.7.2. Control Group of Dimmer Channels
Press Channel to enter [Channel Level];
Press S2 [Load a Group];
Input the Group number and press S1 [Confirm];
Then you can use the wheel to set the output value, or press S3 [Set Level] and use S2 – S4 to set
the output value;
Press Channel to exit setting.
Note: When you choose a specific fixture, you should set up the dimmer range of the Unit according to its
characteristics. If the fixtures are not in the consecutive dimming channel, you’d better use Group to
assemble the Units which are controlled together, so that their outputs can be put out by groups.