Code PHANTOM 1024, Руководство пользователя

Страница: 24 / 46

Phantom_1024_V2.023_en.PDF http://www.codelight.com 18
Rainbow can only be applied to colour-mixed fixtures. Effects with Iris and Focus can only be applied to the
fixtures with those attribute of them.
As the effect names are restrained on the LCD screen list, we cannot explain the real effect by words. You’d
better try to run them all through the patched fixtures.
You can run at most 5 effects of different attributes at one time when you control console manually.
5.3. Change Size and Speed of Effect
After you select the Effect, it’s easy to change its size and speed.
Run an Effect;
Press Exit to return to “Effect Setup” mode, press S4 [Effect Size and Speed];
Use control wheel A to change Size of Effect and control wheel B to change Speed of Effect.
5.4. Change Position of Effect
Effect with Pan / Tilt is based on the present Pan / Tilt location. The light beams of the effect move around the
location as a center. Other attributes will not be changed along with the altered location.
Run an Effect;
Press Tilt/Pan in Attributes section and use control wheel A and B to change the location of light beams.
5.5. Effect Spread
Effect will be more interesting and impressive if you apply them to multiple fixtures. Effect spread can produce
endless changes. When using the control wheels to spread the Effect, the locations of light beams will be
automatically and equally distributed to each point of the Effect. You can see the degree of spread on the LCD
screen. Different degrees have different effects.
Run an Effect;
Press Exit to return to “Effect Setup” mode, press S6 [Effect Spread];
Use control wheel B to change the degree of spread.