Code Soft TP-290XIII, Руководство программиста

Страница: 24 / 31

THERMAL RECEIPT PRINTER
23
§
In standard mode, the following commands use x or y, regardless of
character rotation (upside-down or 90
°
clockwise rotation):
①
Commands using x: ESC SP , ESC $ , ESC \ , FS S, GS L , GS W
②
Commands using y: ESC 3 , ESC J , GS V
§
In page mode, the following command use x or y, depending on character
orientation:
①
When the print starting position is set to the upper left or lower right of the
printing area using ESC T (data is buffered in the direction perpendicular to
the paper feed direction):
Commands using x: ESC SP , ESC $ , ESC W , ESC \, FS S
Commands using y: ESC 3 , ESC J , ESC W , GS $ , GS \ , GS V
②
When the print starting position is set to the upper right or lower left of the
printing area using ESC T (data is buffered in the paper feed direction):
Commands using x: ESC 3 , ESC J , ESC W , GS $ , GS \
Commands using y: ESC SP , ESC $ , ESC W , ESC \ , FS S , GS V
§
The command does not affect the previously specified values.
§
The calculated result from combining this command with others is truncated
to the minimum value of the mechanical pitch.
[Default] x = 200, y = 200
[Reference] ESC SP, ESC $, ESC 3, ESC J, ESC W, ESC \, GS $, GS L, GS V, GS W, GS \
37
、
GS W nL nH Set printing area width
[Format] ASCII GS W nL nH
Hex 1D 57 nL nH
Decimal 29 87 nL nH
[Range] 0
≤
nL
≤
255
0
≤
nH
≤
255
[Description] Sets the printing area width to the area specified by nL and nH.
The printing area width is set to [(nL + nH
×
256)
×
horizontal motion unit] inches
可 打 印 区域
左 边距 打 印 区域宽 度
[Notes]
§
This command is effective only processed at the beginning of the line.
§
In page mode, the printer performs only internal flag operations.
§
This command does not affect printing in page mode.
§
If the [left printing area width] exceeds the printable area, [printable
area width - left margin] is used.
§
The horizontal and vertical motion units are specified by GS P . Changing the
horizontal and vertical motion units does not affect the current left margin.
§
The horizontal motion unit (x) is used for calculating the printing area width.
§
The calculated result is truncated to the minimum value of the mechanical pitch.