Code Soft TP-290XIII, Руководство программиста

Страница: 21 / 31

THERMAL RECEIPT PRINTER
20
④
Printer is reset or the power is turned off.
§
The following figure shows the relationship between the downloaded bit image
and the printed data.
最 高位
最 低位
D1 d1
dy+1
dy+3 ---------------- ---- d 70
d2 ------ ------------ -- - - d71
dy
dy+ 2 --- -- - ---- ----------- d x y 8
× ×
Y y 8 × 点
X x 8 × 点
[Reference] GS /
32
、
GS / m Print downloaded bit image
[Format] ASCII GS / m
Hex 1D 2F m
Decimal 29 47 m
[Range] 0
≤
m
≤
3, 48
≤
m
≤
51
[Description] Prints a downloaded bit image using the mode specified by m .
m selects a mode from the table below:
m Mode Vertical Dot Density (DPI) Horizontal Dot Density (DPI)
0, 48 Normal 200 200
1, 49 Double-width 200 100
2, 50 Double-height 100 200
3, 51 Quadruple 100 100
[Notes]
§
This command is ignored if a downloaded bit image has not been defined.
§
In standard mode, this command is effective only when there is no data in the
print buffer.
§
This command has no effect in the print modes (emphasized, double-strike,
underline, character size, or white/black reverse printing), except for up side
down printing mode.
§
If the downloaded bit-image to be printed exceeds the printable area, the
excess data is not printed.
[Reference] GS *
，
GS *