THERMAL RECEIPT PRINTER
9
[Notes]
§
The DIP switch settings are not checked again.
§
The data in the receive buffer is not cleared.
§
Macro defined is reserved.
§
NV bitmap data is not cleared.
14
、
ESC D n1...nk NUL
Set horizontal tab positions
[Format]
ASCII
ESC
D n1... nk NUL
Hex
1B
44 n1...nk 00
Decimal
27
68 n1...nk 0
[Range]
1
≤
n
≤
255
0
≤
k
≤
32
[Description]
Set horizontal tab positions
§
n specifies the column number for setting a horizontal tab position from the
beginning of the line.
§
k indicates the total number of horizontal tab positions to be set.
[Notes]
§
The horizontal tab position is stored as a value of [character width x n]
measured from the beginning of the line. The character width includes the
right-side character spacing, and double-width characters are set with twice
the width of normal characters.
§
This command cancels the previous horizontal tab settings.
§
When setting
n
= 8, the print position is moved to column 9 by sending
HT
.
§
Up to 32 tab positions ( k = 32) can be set. Data exceeding 32 tab positions
is processed as normal data.
§
Transmit
[n] k
in ascending order and place a NUL code 0 at the end. When
[n] k
is less than or equal to the preceding value
[n] k-1
, tab setting is finished
and the following data is processed as normal data.
§
ESC D NUL
cancels all horizontal tab positions.
§
The previously specified horizontal tab positions do not change, even if the
character width changes.
§
Character width is absolute in standard mode and page mode.
[Default]
The default tab positions are at intervals of 8 characters (columns 9, 17, 25, ...)
for the font B (12 14).
[Reference]
HT
15
、
ESC E n Turn emphasized mode on/off
[Format]
ASCII
ESC
E n
Hex
1B
45 n
Decimal
27
69 n
[Range]
0
≤
n
≤
255
[Description]
Turn emphasized mode on/off
