Manual Description
Command Notation
[Name]
Command in ASCII format and general description.
[Format]
The code sequence, including ASCII, HEX and DECIMAL.
[Range]
Gives the allowable ranges for the arguments.
[Description] Describes the command
’
s function.
[Details]
Describes the usage of the command in detail.
[Notes]
Provides important information on setting and using the printer command.
[Reference] Lists related commands.
[Example]
Gives examples of how to use the command.
1
、
HT
Horizontal tab
[Format] ASCII
HT
Hex
09
Decimal
9
[Description] Moves the print position to the next horizontal tab position.
[Details]
§
This command is ignored unless the next horizontal tab position has been set.
§
If the next horizontal tab position exceeds the printing area, the printer sets the
printing position to [Printing area width + 1].
§
Horizontal tab positions are set with
ESC D
.
§
If this command is received when the printing position is at [printing area
width + 1], the printer executes print buffer-full printing of the current line and
horizontal tab processing from the beginning of the next line.
§
The default setting of the horizontal tab position for the paper roll is font A (12
╳
24) every 8 character (column 9, 17, 25, ...).
§
When the buffer is full on current line, the printer will do the following:
In Standard Mode, print the current line and set the print position to next line.
In Page Mode, printer enters new line and set the print position to next line.
[Reference]
ESC D
2
、
LF Print and line feed
[Format]
ASCII
LF
Hex
0A
Decimal
10
[Description]
Prints the data in the print buffer and feeds one line based on the current line spacing.
[Note]
This command sets the print position to the beginning of the line.
[Reference]
ESC 2, ESC 3
THERMAL RECEIPT PRINTER
