Code 3 3990 SERIES, Руководство по установке и эксплуатации

Страница: 2 / 28

2
I n t r o d u c t i o n
The 3990 series siren is a new series of remote control electronic sirens that has been designed to meet the
needs of all emergency vehicles. This series of sirens incorporates the popular features of the existing
Mastercom siren with microprocessor based circuitry and MOSFET technology. All of the original
features are available along with many new added features that are not available on any other Code 3 siren
such as; Park Kill, Instant "ON", Adj. Backlighting, " Scroll " Mode and more.
Standard Features
The 3990 series sirens consist of remotely mounted siren amplifier with integral lighting control which is
operated by a compact control panel designed to be conveniently mounted near the operator. The models are
as follows:
3997/3997R
- Primary Tones: Wail, Yelp, Hi-Lo, Air Horn
- Secondary Tones: HyperYelp, HyperLo
- 6 auxiliary lighting controls
- Integral Arrow Stik Control
3998/3998R - Primary Tones: Wail, Yelp, Hi-Lo, Air Horn
- Secondary Tones: HyperYelp, HyperLo
- 6 auxiliary lighting controls
2
WARNING!
SIREN PRODUCTS:
!
Sirens are an integral part of an effective audio/visual emergency warning system.
However, sirens are only short range secondary warning devices. The use of a siren
does not insure that all drivers can or will observe or react to an emergency warning
signal, particularly at long distances or when either vehicle is traveling at a high rate
of speed. Sirens should only be used in a combination with effective warning lights
and never relied upon as a sole warning signal. Never take the right of way for
granted. It is your responsibility to be sure you can proceed safely before entering an
intersection, driving against traffic, or responding at a high rate of speed.
The effectiveness of this warning device is highly dependent upon correct mounting
and wiring. Read and follow the manufacturer’s instructions before installing or using
this device. The vehicle operator should check the equipment daily to insure that all
features of the device operate correctly.
To be effective, sirens must produce high sound levels that potentially can inflict
hearing damage. Installers should be warned to wear hearing protection, clear by-
standers from the area and not to operate the siren indoors during testing. Vehicle
operators and occupants should assess their exposure to siren noise and determine
what steps, such as consultation with professionals or use of hearing protection
should be implemented to protect their hearing.
This equipment is intended for use by authorized personnel only. It is the user’s
responsibility to understand and obey all laws regarding emergency warning devices.
The user should check all applicable city, state and federal laws and regulations.
Code 3, Inc., assumes no liability for any loss resulting from the use of this warning
device.
Proper installation is vital to the performance of the siren and the safe operation of the
emergency vehicle. It is important to recognize that the operator of the emergency
vehicle is under psychological and physiological stress caused by the emergency
situation. The siren system should be installed in such a manner as to: A) Not reduce
the acoustical performance of the system, B) Limit as much as practical the noise
level in the passenger compartment of the vehicle, C) Place the controls within
convenient reach of the operator so that he can operate the system without losing eye
contact with the roadway.
Emergency warning devices often require high electrical voltages and/or currents.
Properly protect and use caution around live electrical connections. Grounding or
shorting of electrical connections can cause high current arcing, which can cause
personal injury and/or severe vehicle damage, including fire.
PROPER INSTALLATION COMBINED WITH OPERATOR TRAINING IN THE
PROPER USE OF EMERGENCY WARNING DEVICES IS ESSENTIAL TO INSURE
THE SAFETY OF EMERGENCY PERSONNEL AND THE PUBLIC.