background image

WARRANTY

 

Code 3®, Inc.’s emergency devices are tested and found to be operational at the time of manufacture.  Provided they are installed and 

operated in accordance with manufacturer’s recommendations, Code 3®, Inc. guarantees all parts and components except the lamps to a period 

of 1 year, LED Lighthead modules to a period of 5 years (unless otherwise expressed) from the date of purchase or delivery, whichever is later.  

Units demonstrated to be defective within the warranty period will be repaired or replaced at the factory service center at no cost.

 

Use of lamp or other electrical load of a wattage higher than installed or recommended by the factory, or use of inappropriate or 

inadequate wiring or circuit protection causes this warranty to become void.  Failure or destruction of the product resulting from abuse or unusual 

use and/or accidents is not covered by this warranty.  Code 3®, Inc. shall in no way be liable for other damages including consequential, indirect 

or special damages whether loss is due to negligence or breach of warranty.

 

CODE 3®, INC. MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY INCLUDING, WITHOUT LIMITATION, WARRANTIES OF 

FITNESS OR MERCHANTABILITY, WITH RESPECT TO THIS PRODUCT.

PRODUCT RETURNS

If a product must be returned for repair or replacement*, please contact our factory to obtain a Return Goods Authorization 

Number  (RGA number) before you ship the product to Code 3®, Inc.  Write the RGA number clearly on the package near 

the mailing label.  Be sure you use sufficient packing materials to avoid damage to the product being returned while in 

transit.

*Code 3®, Inc. reserves the right to repair or replace at its discretion.  Code 3®, Inc. assumes no responsibility or liability for expenses incurred for the removal and /or reinstallation of products requiring service and/or repair.; nor for the packaging, 

handling, and shipping: nor for the handling of products returned to sender after the service has been rendered.

Problems or Questions? Call The Technical Assistance HOTLINE - (314) 996-2800

Code 3,  Inc.

10986 N. Warson Road

St. Louis, Missouri 63114-2029—USA

Ph. (314) 426-2700  Fax (314) 426-1337

www.code3pse.com

Code 3,® Inc., a subsidiary of

Public Safety Equipment, Inc.

Revision 1, 11/08 - Instruction Book Part No. T15068

©2008 Public Safety Equipment, Inc. Printed in USA

Code 3 is a registered trademark of

Code 3, Inc.

16

Содержание 3599L5

















Отзывы: