Codan 3048, Руководство по установке

Страница: 28 / 53

I
NSTALLING THE ANTENNA
I
NSTALLING THE ANTENNA
20 3048 T
UNED
D
IPOLE
A
NTENNA
I
NSTALLATION
H
ANDBOOK
1
Position the bottom section of the mast between the flanges
on the base plate, laying in the direction of the installation
area.
1
Align the hole in the bottom of the mast with the central pair
of holes in the mounting flanges of the base plate.
1
Place an M12 flat washer onto an M12 bolt, then thread this
into the hole on the mounting flange.
1
Hold an M12 flat washer between the mounting flange and
the mast, then thread the bolt through this into the mast.
1
Hold another M12 flat washer between the other side of the
mast and the mounting flange, then thread the bolt through
this into the mounting flange.
1
Place an M12 flat washer, an M12 spring washer, then an
M12 nut onto the M12 bolt.
1
Tighten the nut with your fingers only.
1
Attach the erection pole to the outmost pair of holes in the
mounting flanges of the base plate using the remaining M12
bolt and M12 nut.
1
Tighten the nut with your fingers only.
1
Slide guy assembly 1 over the end of the bottom section of
the mast.
1
Slide guy assembly 2 over the end of the top section of the
mast.
1
Apply Alminox to the outer end of the bottom section of the
mast.