EN
G
LI
S
H
9
3. Press the lid down firmly until all lugs clip
securely into place.
4. Fit the discharge chute guide onto the grass
collector. The guide helps to direct the inflow
of grass into the collector.
5. Fit the collector onto the mower
by first lifting up the inspection
hatch, hooking it on to its
fasteners and closing
the lid again.
6. Disconnect the mower from
the mains, lift the inspection
hatch and remove the grass
collector from the mower to
empty it.
Operating instructions
Adjusting the cutting height
Note:
Make sure that the mower is disconnected
from the mains before adjusting the cutting height.
1. Lay the mower onto its side.
2. Set the spring loaded wheel axle into
the desired cutting height position.
Refer to the table.
Position
Cutting height
1
20 mm
2
40 mm
3
60 mm
